MIXING INSTRUCTIONS*
This product settles and must be thoroughly mixed before use!
When using a 250 gal tote, product must be thoroughly agitated (preferably mechanically) until product is in suspension and all settled material is mixed thoroughly. This can be accomplished by using a transfer pump hooked to the tote's bottom outlet and directed back into the tote's fill opening for several minutes or by using an electric drill motor with a long shaft agitation paddle. Proper mixing insures proper results.
MIX RATIO
Mix 5 gallons BTN+ with 50 gallons of water per acre
APPLICATION INSTRUCTIONS:
STEP ONE:
(If planting a new crop - we recommend you do not skip this step)
To realize maximum benefit from use of this product, it is strongly recommended that you apply a “soil drench” application to the prepared soil before planting the crop. (If you choose to skip this step - go to step two)
STEP TWO
Use the above mix ratio and mix in planting water when planting plants
STEP THREE
Use the above mix ratio and apply 10-14 days later
STEP FOUR
Use one-half mix ratio and apply every 10-14 days thereafter until harvest
BTN+ can be applied by the following methods:
Soil drench method
Spray or herbicide boom
Injection via Drip line (if available)
Injection via Micro-jet (if available)
Aerial (airplane or helicopter)
Foliar (speed sprayer, boom sprayer, etc.)
NOTE: Because BTN+ is a root builder, the product needs to be applied to the soil to be most effective. It must be applied with water since water activates the product.
HANDLING & STORAGE
USE ONLY AS DIRECTED
KEEP OUT OF THE REACH OF CHILDREN
DO NOT ALLOW THE PRODUCT TO FREEZE
DO NOT STORE PRODUCT IN DIRECT SUNLIGHT FOR EXTENDED PERIODS OF TIME
* These instructions and usage rates are designed for commercial or professional use only and are not designed or formulated for home use. If you are interested in BTN+ for home and garden usage, please go here.
